Barrett Communications: 2060

2060

2060 HF telephone interconnect

Loading

2060 Products gallery

2060 Features

>> Access for stations only fitted with Selcall 98 pre-programmed telephone numbers stored in the 2060 can be accessed by HF mobiles or base stations that only have Selcall and not the full dial Telcall option fitted.

>> DSP based VOX system The VOX (Voice Operated Transmit signal that keys the HF transceiver) is derived from the telephone user's voice using a sophisticated DSP based hybrid providing typically 43 dB isolation.

>> MIL-STD 188-141B, FED-STD 1045 ALE ALE simplifies the operation of the system as the HF network user need only enter the 2060 address and a telephone number required and the telephone caller has only to enter the mobile number required. The ALE system establishes the link between the two.

>> Easy to use menu system Based on the 2050 transceiver's user interface the 2060 is intuitive and easy to program and operate either through front panel menus or via the PC based programming system.

>> Periodic beacons When not handling traffic, if enabled, periodic beacons are sent on all channels at regular intervals. This allows the HF users to evaluate the best channel to use with the 2060 base station.

>> Voice security To provide medium or high level voice encryption for on air message privacy, Secure Call or frequency hopping can be used. Each HF station on the HF network is assigned a specific security code in the case of Secure Call or encryption key based on a combination of a fixed pre-fix and the Selcall ID in the case of frequency hopping. This enables privacy between HF users on the system.

(Note:- An Australian Government Individual Export Permit is required for the frequency hopping option)

>> Multilingual Recordable voice messages allows systems greetings and instructions to be in any language - stored in non-volatile Flash RAM.

>> "Learn" function for non-standard call progress tones Should the selectable standard international telephone call progress tones not operate in certain countries the 2060 can record, learn and store these non-standard call progress tones on site.

>> Large log capacity 4096 log entries of system activity are stored in the 2060 before a download is required.

>> Network management The Barrett 2060 interconnect provides full network management facilities including variable access levels for HF stations calling the telephone network, comprehensive call logging for charging purposes and remote supervision by a dial up computer link.

>> Call charging Call charging information stored in the 2060 can either be based on call duration or information provided by 12 to 16 kHz or 50 Hz metering pulses.

(Note:- The Telco providing the line connected to the 2060 must be requested to provide these metering pulses).

>> DTMF or Decadic dialling To allow operation of the 2060 on older exchanges Decadic dialling as well as DTMF can be selected.

>> Access levels and barring for individual users Stations within the HF network can be allocated individual access levels in relation to the telephone network, i.e. local calls only, full ISD call access, specific number barring or complete barring.

>> DSP noise reduction DSP noise reduction system that provides clearer reception from the HF network can be toggled on or off by the telephone caller by keying 55 on their telephone.

>> Manual / Automatic VOX Should telephone connection be of such poor quality that the automatic VOX becomes unstable, the telephone caller can switch to manual VOX by keying 88 on their telephone and use the hash key on their telephone to change the 2060 from transmit to receive.

>> 2060 system parameters by voice annunciationThe telephone caller can request the frequency of the currently selected channel in kHz by keying 77 on their telephone keypad. Keying 55 will provide the software version, PA temperature, supply voltage during transmit and the percentage of billing storage used from the 2060 and it's associated 2050.

>> Full base station operation features when operated in
manual mode When operated in manual mode the 2060 provides a full manual control of the associated 2050 transceiver.

>> Emergency Selcalls While scanning, all types of emergency calls received will be annunciated both audibly and visually on the associated 2050 transceiver (if a front panel is fitted).

2060 Product info

>> View 2060 brochure online

>> Download 2060 brochure (.pdf file)

>> View 2060 specifications

The Barrett 2060, a fully automatic telephone interconnect, enables high frequency radio network stations to become part of the international telephone network.

HF stations fitted with a "Telcall" facility, based on selective call format CCIR 493, can direct dial any telephone number on the international telephone network.

Telephone subscribers on the international telephone network can dial into the 2060 interconnect and call any station on the HF network.

The Barrett 2060 interconnect also supports MIL-STD 188-141B ALE allowing ALE networks to have fully automatic access to the telephone network.

The 2060 has network management facilities that include variable access levels for HF stations calling the telephone network, comprehensive call logging and remote supervision by a dial up computer link.

2060 Dimensions

2060 HF Telephone interconnect