912 Broadband base station antennas
The Barrett 912 series of broadband base station antennas are designed for use in either an inverted "V" configuration, using a single mast, or a standard dipole configuration, between two masts.
In the inverted "V" configuration the 912 provides a more omni directional radiation pattern. All broadband antennas in the series are designed to provide optimum performance over a wide HF spectrum, without the need for antenna tuners.
Using high quality stainless steel and glass reinforced composites the 912 series of broadband antennas are lightweight and corrosion resistant, but are able to withstand wind speeds in excess of 200 km/h. The antennas are supplied complete with an inverted "V" mounting harness, 30 metres of coaxial cable and high quality waterproof connectors.
General specifications
Frequency range 2 to 30MHz
VSWR less than 2.5:1
Impedance 50 Ohm
Max wind speed 207 km/h
BC91201 125 watt single wire broadband dipole
Length insulator to insulator 48 metres
Width n/a
Power handling 125W CW, 250W PEP
Packed weight 2kg
Packed dimensions 250mm x 300mm x 75mm
BC91200 125 watt multi wire broadband dipole
Length insulator to insulator 28 metres
Width 1.3 metres
Power handling 125W CW, 250W PEP
Packed weight 6kg
Packed dimensions 1.4m x 150mm x 100mm
BC91202 500 watt multi wire broadband dipole
Length insulator to insulator 28 metres
Width 1.3 metres
Power handling 500W CW, 1250W PEP
Packed weight 13kg
Packed dimensions 1.4m x 300mm x 150mm
BC91203 1000 watt multi wire broadband dipole
Length insulator to insulator 28 metres
Width 1.3 metres
Power handling 1000W CW, 2500W PEP
Packed weight 20kg
Packed dimensions 1.4m x 300mm x 150mm
