Lightweight Air Transportable Masts
BC90205 - 10 metre Air Transportable Five Section Lightweight Aluminium Mast with nylon guys for ground mounting
Suitable for use with rapid deployment Barrett 912 single wire broadband antenna or 915 series dipoles. The mast consists of 5 x 2m aluminium sections inserted on top of each other with a 1.5m antenna support outrigger on the top section. There are 2 sets of 3 rope guys. Erection of the mast is possible utilising two persons. Once all sections are assembled, as per the diagram below, and the pegs and base plate have been positioned, simply lift the mast into position and tie off the guy ropes.
Specifications
Guy support spacing: minimum 5 metres / maximum 6 metres from mast base, at 120-Degree intervals around 360-Degrees arc
Packed dimensions: 2000mm x 200mm x 200mm
BC90206 - 10 metre Air Transportable Five Section Lightweight Aluminium Mast and stainless steel fittings for ground mounting
Suitable for use with rapid deployment Barrett 915 single wire broadband antenna or 912 series dipoles. The mast consists of 5 x 2m aluminium sections inserted on top of each other with a 90 degree top section outrigger. There are 2 sets of 3 wire guys and one back stay wire to counter the weight of the antenna. Erection of the mast is possible utilising two persons. Once all sections are assembled, as per the diagram below, and the pegs and base plate have been positioned, simply lift the mast into position and tighten the guy wires.
Specifications
Guy support spacing: minimum 5 metres / maximum 6 metres from mast base, at 120-Degree intervals around 360-Degrees arc.
Packed dimensions: 2000mm x 200mm x 350mm
Packed weight: 33kg
Wind: 120kph
BC90207 - 10 metre Air Transportable Five Section Lightweight Aluminium Mast with roof mounting kit and stainless steel fittings
Suitable for use with rapid deployment Barrett 915 single wire broadband antenna or 912 series dipoles. The mast consists of 5 x 2m aluminium sections inserted on top of each other with a 90 degree top section out rigger. There are 2 sets of 3 wire guys and one back stay wire to counter the weight of the antenna. Erection of the mast is possible utilising two persons. Once all sections are assembled, as per the diagram below, and the cleats and base plate have been positioned, simply lift the mast into position and tighten the guy wires.
Specifications
Guy support spacing: minimum 5 metres / maximum 6 metres from mast base, at 120-Degree intervals around 360-Degrees arc.
Packed dimensions: 2000mm x 200mm x 350mm
Packed weight: 18kg
Wind: 120kph
