Backpack for manpack - colour Multicam - P/N 2090-01-29
The full pack provides for the PRC-2090 and various accessories including wire antennas and spare battery packs. A pouch is provided to hold the PRC-2090’s removable display and handset. The side packs can be detached from pack to make the pack more compact.
Note:- Solar panel bag not included. See Rapid deploy solar panel P/N 2090-03-08
Combined receiver / antenna to suit PRC-2090, PRC-2091 and PRC-2092. Enable the GPS receiver antenna to be placed up to 4 metres from the PRC-2090. Used when the PRC-2090 is deployed at a temporary base station or in a vehicle docking station allowing the GPS to be placed outside the enclosure or vehicle.
Advanced tactical handset - P/N 2090-01-09
Advanced tactical handset with waterproof speaker, microphone, Press-To-Talk (PTT) button and backlit control keypad for use with advanced software features such as Selcall, Groupcall, key entry and front panel programming.
Enables the display and handset to be extended up to 30 metres from the Transceiver. The 1.5 metre standard display / handset extender cable is used when the display is carried on front webbing and the 15 metre extender cable is used for remote operation.
Enables the display and handset to be extended 15 metres from the PRC-2090, used when PRC-2090 is deployed in temporary operations centre when it is desirable to have the PRC-2090 located outside the operations centre near its antennas. Up to two cables can be daisy chained to achieve 30 metre separation between the PRC-2090 and the operator with the display and handset.
Headphones - P/N 2090-01-08
Black lightweight tactical with MIL-STD 15 pin connector.
Vehicle docking station - P/N 2090-05-02
Increases the output of the PRC-2090 tactical transceiver, when docked to 125 W PEP (voice).
– 6 metres DC power cable with connector P/N 2090-03-06
– The handset bracket and speaker bracket.
Waterproof speaker / microphone - P/N 2090-01-25
Speaker / microphone for 2090 manpack with MIL-STD 15 pin connector.
Mass matched vibration mounting platform for Land application - P/N 2090-05-07
Attaches to PRC-2090 vehicle docking station/ PRC-2090 power supply to provide vibration isolation for the PRC-2090 when mounted in heavy or tracked vehicles.
To facilitate mounting of 912 broadbands or 915 wire dipoles in an inverted “V” configuration on either 902 winch-up towers or 902 telescopic masts. Pulley to suit 4 mm halyard.
Tactical installation kit - P/N 2090-05-08
– Large selection of screws to accommodate most installations
– Cable ties
– Rubber amalgamation tape
– Power cable lugs
– Manual circuit breaker
– Braided earth lead with lugs
– 6 metres DC power cable and connector
Lightning arrestor kit 400 W - P/N 2090-05-09
– 1 x Surge arrestor with PL259/UHF (female) connectors
– 1 x 5 metres length of RG58 Coaxial cable with UHF (male)
– 1 x Steel dolly
– 1 x 3 metres earth braid
– 1 x Brass cable clamp assembly
– 1 x Copper plated steel earth rod