Portable 5 metres mast kit for tactical broadbands and dipoles – rapid deployment.

Includes:-
– 7 piece mast
– Guys on winders, earth pegs, guy pegs and hammer
– Carry bag – colour black

Operates from 2 to 30 MHz – 125 W PEP max. Frequency markers attached to Kevlar radiators.

Includes:-
– Lanyards wound on reusable spools with throw and securing weights
– 10 metres of RG-58AU coaxial cable, with waterproof BNC and UHF coaxial connectors
– Carry bag – colour black

Operates from 2 to 30 MHz without adjustment – 125 W PEP max. Can be deployed as full length broadband dipole or in compact form. Manufactured with Kevlar radiators and UV resistant Dacron cords.

Includes:-
– Radiators and loads wound on reusable spools
– Lanyards wound on reusable spools with throw and securing weights
– 10 metres of RG-58AU coaxial cable, with waterproof BNC and UHF coaxial connectors
– Carry bag – colour black

For manpack operation in receive mode.
(for transmission from 5 to 30 MHz but at limited efficiency).

For manpack operation with an adaptor to suit the whip stud on PRC-2090.

Includes:-
– Winding hub, antenna wire and throw weight
– Carry bag – colour black

For manpack operation with gooseneck – colour black.

Recommended to increase the efficiency of the PRC-2090 operating with whip antennas below 3 MHz when in dry soil or desert areas where normal earth connections are difficult to achieve.

Includes:-
– Winding hub, wire earth radials and weights

Recommended to increase the efficiency of the PRC-2090 operating with whip antennas below 3 MHz.

Includes:-
– Winding hub, wire earth radial and peg

Complete whip adaptor to fit 2090 manpack.

Features:-
– Frequency range 2 to 30 MHz
– Fast tuning – typically less than 2 seconds
– Extremely robust technical plastic alloy radome
– Two piece MIL-SPEC whip and spring
– Immersible to 1 metre for 1 hour
– Meets MIL-STD 810G for shock, temperature, vibration and dust

Note :- See brochure for more detailed information.

The Barrett Near Vertical Incidence Skywave (NVIS) antenna whip is designed to enhance the short range communications efficiency of the Barrett 2019 Automatic Tuning Mobile HF Antenna. The usable frequencies for NVIS communications are between 2 MHz and 15 MHz. Length 4000 mm

The NVIS Kit Magnetic Mounting Base is designed to provide fast and convenient mounting of the end of the NVIS antenna whip (P/N BCA201910). The three powerful magnet feet are covered with silicone rubber to prevent damage to painted surfaces.

Gutter mount bracket for NVIS whip.

Features:-
Frequency Range: 2 – 30MHz tuneable
Power Rating: 150 Watts PEP
Polarisation: Vertical
Memory tune in <130ms, Non-Memory tune in ALE compatible
Frequency-hopping compatible
MIL-STD-810F Waterproof ,Vibration, and Dust
Base Mounting: NATO 6 or 3 hole pattern / USA 4 hole pattern

Features:-
Frequency Range: 2 – 30MHz tuneable
Power Rating: 150 Watts PEP
Polarisation: Vertical
Memory tune in <130ms, Non-Memory tune in ALE compatible
Frequency-hopping compatible
MIL-STD-810F Waterproof ,Vibration, and Dust

For mounting a Barrett 4011 MIL-SPEC ATU into an armoured or other shock heavy vehicle.

GPS receiver fitted inside the 2019 antenna, interfaces to the 2090 docking station via the RF control cable supplied with 2019 antennas.

Operates from 2 to 30 MHz with frequency lables to indicate tuned length. Manufactured with Kevlar radiators and UV resistant Dacron cords.
Includes:-
– Throw Cord and securing weight wound on reusable spools
– 20 metres of RG-58AU coaxial cable, waterproof C32-21 UHF type coaxial connector
– Carry bag – colour black

Operates from 2 to 30 MHz without adjustment – 125 W PEP max. Can be deployed as full length broadband dipole or in compact form. Manufactured with Kevlar radiators and UV resistant Dacron cords.

Includes:-
– Radiators and loads wound on reusable spools
– Throw Cord and securing weight wound on reusable spools
– 20 metres of RG-58AU coaxial cable, waterproof C32-21 UHF type coaxial connector
– Carry bag – colour black

Operates from 2 to 30 MHz without adjustment – 125W PEP max. Provides omnidirectional coverage with strong near vertical radiation for NVIS communications and also good signal strength at lower angles for medium and longer range communications. Rugged construction is rugged with Kevlar radiator wires and robust extruded-alloy balun housing.

Includes:-
– Radiators wound on reusable spools
– Throw Cord and securing weight wound on reusable spool
– 20 metres of RG-58AU coaxial cable, waterproof C32-21 UHF type coaxial connector with protective cover
– Carry bag – colour black

The Barrett 4017 is a compact base antenna solution for installations in areas with space limitations where normal wire broadband antennas are not practical.
– Full Coverage from 2~30MHz.
– Omni directional Radiation, Can be installed on wide range of masts & poles
– Recommended height 6 ~ 10 metres
– Max installed length 5.7 metres
– Compact packaging for Air Shipment

Includes:-
– 30 metres of integral RF control cable and connectors P/N 4017-01-01

Mounting plate for mounting 2019 antenna on existing vehicle mounts with NATO 6 or 3 hole or USA 4 hole patterns.

Mounting bracket for mobile whip antenna.

Note:- Requires 2019-01-07 Adaptor plate for 2019 installation.

Ideal for NVIS propagation or applications requiring constant coverage for distances of 0-1000km, the loop antenna provides significantly more gain than conventional whip antenna systems.

Features:-
– Frequency range 3.9 to 12.5 MHz
– Fast tuning – typically less than 2 seconds
– Meets MIL-STD 810G for shock, temperature, vibration and dust
– Packed size 2000 mm x 1300 mm x 200 mm

Single section stainless steel whip for the Barrett 2019 automatic tuning mobile antenna for NVIS operation. Length 2080 mm

27 metres stanless steel, fibreglass spreaders and encapsulated baluns and loads.

Includes:-
– 30 metres of RG-58AU coaxial cable with waterproof C32-21 type UHF coaxial connectors.

Note:- Masts supplied separately.

Suitable for rapid deployment of Barrett 912 broadband antennas or Barrett 915 series wire dipole. With Nylon guys and ground mounting. Packed length 2 metres, suitable for air-freight.

Includes:-
– Offset bracket and pulleys
– Nylon guys, guy anchor pegs, pulleys and halyard
– Installation instructions