

The Barrett 1 kW ATU automatically matches the 50 ohm output of the 2075 high power transmitters to a wide variety of end-fed unbalanced antennas such as whips and long wires.
The Barrett 1 kW ATU has a 100-channel memory that allows “silent tuning” on channels previously tuned in less than 20 mS. The tuner can provide tactical security by permitting remote location of the antenna tuner and antenna up to 30 metres from the associated transmitter.
RF power input | 1000 W, PEP or average |
Duty cycle | All modes including data operation, within constraints of internal temperature (see temperature spec) |
Frequency range | 2 MHz to 30 MHz |
Tuning range versus antenna type | 5 metre whip: 3 MHz to 30 MHz 10 metre whip: 2.5 MHz to 30 MHz 25 to 50 metre long wires: 1.6 MHz to 30 MHz |
Duty cycle | 100% at 500 W PEP Voice 100% at 500 W ARQ 100% at 500 W FEC |
Note: Effective tuning requires the installation of an efficient grounding system in conjunction with the antenna
RF tune power required | 10 W |
Tune time | 3 to 5 S, first tune typical < 20 mS, memory tune |
Input impedance | 50 ohm |
Input power requirements | 28 V DC, 4 A peak, 1.8 A average |
Tuning accuracy | 1.5:1 VSWR typical |
Memory channels | 100 |
Temperature (operating) | -30° to +55°C (ambient inside case) |
Note: This temperature can easily be exceeded if the case is exposed to direct sunlight. For FSK operation, it is important that the tuner is installed so that the case is not exposed to direct sunlight
Shock, vibration | MIL-STD 810G (with shock mount) |
Immersion | Waterproof; immersion to 1 metre |
Humidity, fungus, sand & dust, salt, fog | MIL-STD 810G |
Controls and indicators | |
Connectors | RF input, control input, RF output, grounding lug |
Control interface | Specific to Barrett Communications series of HF transceivers |
Specifications are typical. Equipment descriptions and specifications are subject to change without notice or obligation.
2075 1 kW automatic antenna tuner is fully waterproof and can be immersed to 1 m.
An opto-coupled interface is supplied to provide high RF interference immunity on long control cable runs.
The 1 kW automatic antenna tuner operates from 1.6 to 30 MHz.
Typically 3 to 5 seconds on initial tune and less than 20 mS on memory tunes.
The memory tune system is fully compatible when operating ALE to MIL-STD 188-141B.
Operates at 1000 Watts PEP or average at 100% duty cycle.
© 2021 Barrett Communications | Privacy Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
4050 HF SDR Control Handset brochure
English
PRC-4090 HF SDR brochure
English
4077 HF Map & Track Brochure
English
PRC-2090 RFDS – HF Rapid Field Deployment System
English
PRC-2080 RFDS – VHF Rapid Field Deployment System brochure
English
2050 RFDS – HF Rapid Field Deployment System
English
4050 HF SDR Transceiver Desk Console brochure
English
Please register your interest to attend a field demonstration of Barrett’s tactical HF, VHF and interoperability solutions. This form is only to register your interest and we will contact you via email to arrange a suitable time to discuss your demonstration requirements further.
[contact-form-7 id=”10970″ title=”Barrett Field Demonstration”]
We look forward to welcoming you to our stand in Hall 5A – B322.
Please complete the registration form below and we will contact you to arrange a suitable time to meet.
[contact-form-7 id=”10994″ title=”Meeting with Barrett”]
Barrett have been given an exclusive offer, by Clarion Events (the DSEI event organiser) that we can share with you. This offer can be used when registering to attend and will provide you with free registration until 30th June 2017 and a reduced admission fee on your registration fee after that date.
Please note that although the Guest Code allows applicants a reduced administration fee, all applicants are still required to go through the Clarion Events (DSEI event organiser) standard verification and payment process.
To receive the Barrett guest code for DSEI, please complete the form below and the Barrett guest code and the Clarion Events link to register will be emailed to you.
[contact-form-7 id=”10996″ title=”DSEI Guest code”]